Laser cutting session

Today we’re in for a laser cutting session at 14-15 pm. It’s taking place in the library. We have two boxes for the joystick-assignment, one for the small Arduino-board and one for the normal-sized Arduino-board.

The design of the box is shown on the picture below.

qzB5E-7TxJyICloDBR9k6wODKFyXrGSJRqFy8XmiwahTx2pYDmWHRfJjckwDr8kAQw=w2266-h856

We also have to laser-cut the four plates for the ball bearings for the foam-cutter.

All in all, we have to lasercut 6 assembled objects.

Before we go, we have to finish the CAD-model and come up with a name for the construction.

Skriv et svar

Udfyld dine oplysninger nedenfor eller klik på et ikon for at logge ind:

WordPress.com Logo

Du kommenterer med din WordPress.com konto. Log Out /  Skift )

Twitter picture

Du kommenterer med din Twitter konto. Log Out /  Skift )

Facebook photo

Du kommenterer med din Facebook konto. Log Out /  Skift )

Connecting to %s