The lasercutting session part II

The second lasercutting session took place at DTU Campus Ballerup. We had another lasercutting session at DTU Lyngby, but something went wrong during the cutting, and our work was not usable. We weren’t able to get another session at the Skylab until next wednesday, which is the same day we hand in project 3. Because of that, we decicded to go to Ballerup Campus, where we had a contact who could help us with the Laser cutter. He told us, that the Laser cutter was free to use and had lots of available materials.The laser cutting went very well, and we got all our parts perfectly cut.  The pictures below show the work:

The box from project 3 is being cut

The box from project 3 is being cut


The components for the Foam-cutter

The components for the Foam-cutter


Skriv et svar

Udfyld dine oplysninger nedenfor eller klik på et ikon for at logge ind: Logo

Du kommenterer med din konto. Log Out /  Skift )

Twitter picture

Du kommenterer med din Twitter konto. Log Out /  Skift )

Facebook photo

Du kommenterer med din Facebook konto. Log Out /  Skift )

Connecting to %s